| dc.creator |
Serra Coromina, Pere |
|
| dc.creator |
Miguel de la Fuente, José María |
|
| dc.creator |
Morenza Gil, José Luis |
|
| dc.creator |
Guilemany, J. M. (José María) |
|
| dc.date |
2011-05-25T10:54:21Z |
|
| dc.date |
2011-05-25T10:54:21Z |
|
| dc.date |
2001 |
|
| dc.date.accessioned |
2024-12-16T10:27:08Z |
|
| dc.date.available |
2024-12-16T10:27:08Z |
|
| dc.identifier |
0884-2914 |
|
| dc.identifier |
http://hdl.handle.net/2445/18205 |
|
| dc.identifier |
194637 |
|
| dc.identifier.uri |
http://fima-docencia.ub.edu:8080/xmlui/handle/123456789/21925 |
|
| dc.description |
The interconnected porosity of the Cr3C2-NiCr coatings obtained by high-velocity oxy fuel spraying is detrimental in corrosion and wear resistance applications. Laser treatments allow sealing of their surfaces through melting and resolidification of a thin superficial layer. A Nd:YAG laser beam was used to irradiate Cr3C2-NiCr coatings either in the continuous wave mode or at different repetition rates in the pulsed one. Results indicated that high peak and low mean laser irradiances are not good, since samples presented deep grooves and an extensive crack network. At low peak and higher mean laser irradiances the surface was molten, and only a few shallow cracks were observed. The interconnected porosity was completely eliminated in a layer up to 80 m thick, formed by large Cr7C3 grains imbedded in a NiCr matrix. |
|
| dc.format |
7 p. |
|
| dc.format |
application/pdf |
|
| dc.language |
eng |
|
| dc.publisher |
Materials Research Society |
|
| dc.relation |
Reproducció del document publicat a: http://dx.doi.org/10.1557/JMR.2001.0470 |
|
| dc.relation |
Journal of Materials Research, 2001, vol. 16, núm. 12, p. 3416-3422 |
|
| dc.relation |
http://dx.doi.org/10.1557/JMR.2001.0470 |
|
| dc.rights |
(c) Materials Research Society, 2001 |
|
| dc.rights |
info:eu-repo/semantics/openAccess |
|
| dc.source |
Articles publicats en revistes (Física Aplicada) |
|
| dc.subject |
Làsers |
|
| dc.subject |
Crom |
|
| dc.subject |
Revestiments protectors |
|
| dc.subject |
Corrosió i anticorrosius |
|
| dc.subject |
Lasers |
|
| dc.subject |
Chromium |
|
| dc.subject |
Protective coatings |
|
| dc.subject |
Corrosion and anti-corrosives |
|
| dc.title |
Structural characterization of laser-treated Cr3C2-NiCr coatings |
|
| dc.type |
info:eu-repo/semantics/article |
|
| dc.type |
info:eu-repo/semantics/publishedVersion |
|